All Products
Contact Person :
Bella Huang
Phone Number :
+86 13923791048
WhatsApp :
+8613923791048
350 Ton Cooling Towers Chiller And Cooling Tower System 50Hz 380 Volt Three Phase

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
Cooling Capacity | 1366200kcal/h | Nominal Flow | 273.24m3/h |
---|---|---|---|
Power | 380V/3P/50Hz | Height × Diameter(H×φ) | 4400×4630mm |
Inlet Pipe Caliber | 200mm | Outlet Pipe Caliber | 200mm |
Brand | Anges | ||
High Light | 350 Ton Cooling Towers,350 tr Cooling Towers,50Hz chiller tower |
Product Description
350tons cooling tower technical parameters
Model | STG-350 | |
Basic parameter |
Type | Counter current circular cooling tower |
Nominal flow | 273.24m3/h | |
Inlet/outlet temperature | 37℃/32℃ | |
Dry-bulb temperature | 31.5℃ | |
Wet-bulb temperature | 27℃ | |
Cooling capacity | 1366200kcal/h | |
Noise (dB(A)) | 65dB(A) | |
Power | 380V/3P/50Hz | |
Water quality | PH=6 to 8 | |
N.W/G.W | 1800kg/3970kg | |
Fan | Fan type | Axial Flow |
Cooling air flow(m3/h) | 163944m3/h | |
Rotation speed(r/min) | 320r/min | |
Diameter | 2400 mm | |
Quantity | 4 pieces/set | |
Electronic box | Water proof type | |
Power | 7.5kw | |
Start-up mode | Direct start | |
Size |
Height × diameter(H×φ) | 4400×4630mm |
Inlet pipe caliber | 200mm | |
Outlet pipe caliber | 200mm | |
Full outlet/drain off pipe caliber | 80mm/80mm | |
water supply pipe caliber | 25mm | |
Material | Sprinkler | P.V.C-U |
Casing | Fiberglass | |
Water basin | ||
Fan | Al alloy | |
Electronic box | Water proof type | |
In -fill | P.V.C. | |
Shelf | Hot-dip galvanized steel |
Product Description
-
WORKING PRINCIPLE
- Cooling tower is a widely used thermal equipment that absorbs heat from a system and releases it into the atmosphere in order to lower the water temperature.
- The tower chassis, featuring anti-corrosion, strong ability of resistance of vile weather and beautiful appearance made of high strength glassfiber,
- Cooling towers rotation part and connection area is made of high quality raw materials, that greatly improves the service life and connection strength.
-
Advantages
- Low-speed fan to avoid excessive mist into the air.
- FRP body contains stable materials resisting ultraviolet radiation with a long service life.
- The structure contains rust-removing and high-strength galvanized steel which can bear corrosion and can be easily assembled.
- Different types(standard,low-noise,high-temperature and industrial type) to meet your needs
-
Main Features
- Small floating water rate: the spray device is evenly distributed in the tower, and the outlet area is about twice as large as that of the traditional power tower, so the wind speed is small. At the same time, the top of the tower is installed with excellent performance of the water collection device, which minimizes the amount of floating water, and eliminates a lot of water refill.
- Good cooling effect: the hot water in the tower exchanges heat with the incoming air under the condition of mist. Due to the small wind resistance in the tower and the reasonable design of air duct and wind blade, the ratio of air to water is improved.
Recommended Products