1. The components of the laser chiller water system are all international brand components, with lasting and stable refrigeration effect, the temperature control accuracy is ±1℃.
2. The water system of laser chiller adopts stainless steel system (water tank, evaporator, water pump, pipe fittings, etc.) to prevent rust and can directly use pure water or deionized water.
3. Chiller protection system includeds compressor overheat protection, high/low pressure protection, phase missing/sequence protection, flow rate protection, anti-frozen protection, to make the equipment more safe operation.
4. Fully intelligent control system, with a variety of settings and fault display functions.

Benefits of an laser water chiller

1. Laser chiller is used to maintain constant and precise control of the laser generator to reduce downtime and improve the service life.

2. The water chiller precise temperature control can improve the machining accuracy of laser machine and productivity for laser process.

3. Industrial chiller is usually closed-loop systems, which can save water through recirculation cooling.

4. Portable laser chiller contains water tank and the pump and all necessary components, portable and easier installation.

5. The air cooled laser chiller is without additional cooling tower and water pump, easier operation and maintenance.

The daily maintenance method of laser chiller

1. Install the chiller in a ventilated and clean place, ambient temperature below 40 ℃ is recommended and maintain good ventilation.
2. The water should be replaced regularly, and the water tank should be cleaned regularly. Generally, the water should be changed once every 3 months.
3. The quality and temperature of the circulating water will affect the service life of the laser tube, so it is recommended to use pure water.
4. When the lase chiller stops due to fault alarm, must check the cause of the fault. Do not forcibly start the chiller before troubleshooting.
5. Regularly clean the condenser and dust filter of the chiller.
6. If there is no emergency during use, do not arbitrarily shut down the chiller by cutting off the power supply.
7. Winter maintenance in addition to routine maintenance, there is also the need to prevent icing. In order to ensure the normal use of laser chiller, the ambient temperature should not be lower than 5 ℃.If not, add antifreeze solution appropriately.