10hp 10 Ton Industrial Water Chiller For Injection Small Portable Water Chiller Units

About the chiller for Injection Molding

After the plastic is heated and melted, it is injected into the mold. After forming, the mold is opened and the molding product is pushed out. In the continuous production process, it is necessary to cool the mold to shorten the plastic setting time and improve the product size, forming quality and surface quality.

Cold water temperature requirement: 6-20℃, cold water temperature difference requirement: ±2 ℃ or ±1 ℃.

The refrigeration capacity of chiller is related to the injection volume of injection molding machine. The greater the injection volume, the greater the refrigeration capacity is required.

The water chiller can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency.

Specification for injection molding chiller water system

1. Adjustable water temperature: Water cooled type chiller outptu chilled water from +5 to +30℃.Water temperature and flow rate can be designated and adjustable in control range.
2. Stable performance: This chiller used two compressors, and each compressor has an independent refrigeration circuit. All compressors are under the command of a unified microcomputer control system, which can be turned on and off one by one without interfering with each other. The machine is all made of original and genuine products, single machine failure rate is very low. Considering the above reasons, the machine can be guaranteed to have a highly stable performance. 
3. Power saving and energy saving: Multiple small and medium power compressors are used in the chiller, and the interference to the power grid is minimal when switching on and off. With the change of load, the unit will automatically determine the number of startup to ensure that the compressor is in the best working condition, so as to effectively save energy.
4. Long service life: Shell and tube evaporator and condenser, the welded structure is simple, sturdy structure, high quality,  compact structure, long life and so on.
5. Simple installation and operation:  Water cooled chiller contains water tank and the pump and all necessary components. It can work after connecting the production lines with water pipes. The chiller is small size, easy to install, and simple to operate.

Water chiller service from manufacturer

1. All the chillers are provided with 12 months free maintenance service.
2. Provide technical explanation, chiller debugging support, technical training and chiller maintenance guidance.
3. If necessary, after-sales engineers can be on-site service confirmed by both parties through communication .In some areas, local dealers can provide fast and convenient service.
4. Provide the air chiller and water chiller required parts quickly to ensure the normal use of customers.If necessary, part of the wearing parts can be provided for backup after confirmation by both parties.
5. Chiller maintenance service outside the warranty period, life-long tracking maintenance, cost price to provide equipment parts.