Send Message
Home > products > Industrial Water Chiller >
Air Cooled Water Chiller 12hp 12Ton Injection Molding Chiller portable chiller for Plastic Industry mold cooling chiller

Air Cooled Water Chiller 12hp 12Ton Injection Molding Chiller portable chiller for Plastic Industry mold cooling chiller

Plastic air cooled industrial water chiller

air cooled industrial water chiller 12hp

12 Ton industrial inline water chiller

Place of Origin:


Brand Name:


Model Number:


Contact Us

Request A Quote
Product Details
Air Cooled Type
Compressor Type:
Scroll Type
Included 2 Bar- 4 Bar
Water Tank:
Included 85L
Compressor Power:
Temperature Range:
5℃ ~ 30℃
Industrial Cooling Solutions,Plastic & Rubber / Chemical Etc / Air-conditioning
Payment & Shipping Terms
Packaging Details
Plywood case
Delivery Time
10-35 days
Payment Terms
T/T, L/C
Supply Ability
400 units/ month
Product Description

Air Cooled Water Chiller 12hp 12Ton Injection Molding Chiller Portable Chiller For Plastic Industry Mold Cooling Chiller

Plastic Industry Mold Packaged Chiller
Air-cooled industrial chillers cooling capacities from 3 to 185 kW (0.85 to 52.6ons) are are packaged and portable, including stainless steel #304 water tanks, pumps, popular for plastic process cooling.In the plastic continuous production process, the chillers can accurately control the molding temperature and shorten the molding cycle, increase the product quality and improve the production efficiency. It usually requires a water temperature of 10-25 degrees, which the cooling tower cannot meet this temperature.

Injection Molding Chiller Specification 


nominal cooling capacity kcal/h 30298
  kw 35.2
input power kw 12.34
power supply 3PH/380V/50HZ
refrigerant type R410a
  type of control Expansion valve
compressor type hermetic scroll
  power(kw) 9.92
condenser type finned copper tube + low noise outer rotor fan
  cooling air flow(m3/h) 12000
evaporator type Shell and tube
  chilled fluid flow(m3/h) 6.07
  volume(L) 200
  inlet and outlet pipe diameter (inch) 2
pump power (kw) 1.5
  flow rate(m3/h)  
  lift(m) 20
safety protection compressor over temperature, over current, high and low pressure, over temperature, flow switch, phase sequence, phase-missing, exhaust overheating, anti-freezing
weight kg 530
dimension mm 1530*780*1630

Nominal cooling capacity is according to:

Inlet chilled fluid temperature:17℃, Outlet chilled fluid temperature: 12℃.

Inlet cooling air temperature: 30℃, Outlet cooling air temperature:35℃.

The temperature range of chilled fluid is from 5℃ to 30℃.

The air cooled chillers are better to run while the ambient temperature is below 35°C.If not, the chillers will have high pressure alarm.Air-cooled chillers designed for high ambient temperatures are excluded.


Benefit of Plastic Process Chiller Applications


  • 1. The ability to maintain constant and precise control of the plastic molds temperature.
  • 2. Cooling plastic products, fast shaping, reduce production cycle,improve production efficiency.
  • 3. Accurate temperature control capability, cold water temperature can be accurate to ±1, to ensure the highest quality final products.
  • 4. High cooling efficiency, and no waste of water comparing with the cooling tower.

How to select the model of the chiller ?


1. We need to know the heat load of your process or chiller cooling capacity, it can be calculated roughly according to production capacity.
2. Required water temperature, water pressure and flow rate.
3. Application and power supply in local.
4. Max. Ambient temperature in summer day
5. Customized special specifications are acceptable. Contact us for more chiller Specification by number +86 13923791048.


How to ensure your product with good quality?


1. We are specialized in producing industrial chiller since 2004, located in Shenzhen China and give top priority to our quality. All products pass strict multi inspection process which gives customers multi guarantee, most of the accessories use world-class brands, such as Danfoss, Copeland, Schneider electrical components and so on.

2. After industrial chiller assembly, we will charge nitrogen for pressure maintaining testing for 24hrs, to check whether there is leakage in the chiller cooling system.

3. We will provide testing videos, pictures during chiller testing.

4. After the chiller testing commissioning, cleaning and labelling the chiller unit, then go for pre-delivery inspection before packing with plywood cases to to ensure that the chiller can be in good condition during transit.


Air Cooled Water Chiller 12hp 12Ton Injection Molding Chiller portable chiller for Plastic Industry mold cooling chiller 0

Send your inquiry directly to us

Privacy Policy China Good Quality Industrial Water Chiller Supplier. Copyright © 2022-2024 . All Rights Reserved.