|
| Brand Name: | ANGES |
| Model Number: | 85HP |
| MOQ: | 1 |
| Packaging Details: | Plywood case |
| Payment Terms: | T/T, L/C |
85HP Screw Type ChillerWater Cooled Industrial Chillers Water Chiller unit For Plastic mold
Plastic extrusion processing is a commonly used plastic processing method.
It can melt plastic and extrude it through a die to make tubes, plates, rods and other materials of various shapes. During the extrusion process, the plastic raw material needs to be heated and melted first, and then the molten plastic is sent to the die through the screw.
The shape of the extruded material is then determined by the shape of the die.
Central chiller specification
|
Model Item |
AGS-085WSH | |
| nominal cooling capacity | kcal/h | 273308 |
| kw | 317.8 | |
| input power | kw | 63.7 |
| max running current | A | 145.2 |
| power supply | 3PH-380V-50HZ | |
| refrigerant | type | R22 |
| type of control | expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 1 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| evaporator | type | shell and tube |
| chilled fluid flow (m3/h) | 54.7 | |
| pipe diameter (inch) | 4 | |
| condenser | type | shell and tube |
| cooling water flow (m3/h) | 66 | |
| pipe diameter (inch) | 4 | |
| safety protection | compressor over temperature protection, over load protection, high and low pressure protection, flow switch protection, reversed and lacking phase protection, anti-freezing protection,fusible protection. | |
| dimension | mm | 3100*1050*1600 |
| net weight | kg | 1560 |
| running weight | kg | 1780 |
The importance of plastic cooling rate
The impact of too fast cooling rate on product quality
The impact of too slow cooling rate on production efficiency and cost
How to select the model of the chiller ?
|
|
| Brand Name: | ANGES |
| Model Number: | 85HP |
| MOQ: | 1 |
| Packaging Details: | Plywood case |
| Payment Terms: | T/T, L/C |
85HP Screw Type ChillerWater Cooled Industrial Chillers Water Chiller unit For Plastic mold
Plastic extrusion processing is a commonly used plastic processing method.
It can melt plastic and extrude it through a die to make tubes, plates, rods and other materials of various shapes. During the extrusion process, the plastic raw material needs to be heated and melted first, and then the molten plastic is sent to the die through the screw.
The shape of the extruded material is then determined by the shape of the die.
Central chiller specification
|
Model Item |
AGS-085WSH | |
| nominal cooling capacity | kcal/h | 273308 |
| kw | 317.8 | |
| input power | kw | 63.7 |
| max running current | A | 145.2 |
| power supply | 3PH-380V-50HZ | |
| refrigerant | type | R22 |
| type of control | expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 1 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| evaporator | type | shell and tube |
| chilled fluid flow (m3/h) | 54.7 | |
| pipe diameter (inch) | 4 | |
| condenser | type | shell and tube |
| cooling water flow (m3/h) | 66 | |
| pipe diameter (inch) | 4 | |
| safety protection | compressor over temperature protection, over load protection, high and low pressure protection, flow switch protection, reversed and lacking phase protection, anti-freezing protection,fusible protection. | |
| dimension | mm | 3100*1050*1600 |
| net weight | kg | 1560 |
| running weight | kg | 1780 |
The importance of plastic cooling rate
The impact of too fast cooling rate on product quality
The impact of too slow cooling rate on production efficiency and cost
How to select the model of the chiller ?
Address
Tianshenghu Village Group, Luoma Village QingxiTown,Dongguan
Tel
86-755-8958-3300
