Place of Origin:
China
Brand Name:
ANGES
Model Number:
170HP
Contact Us
170HP Air Cooled Screw Chiller Industrial Process Water Chillers plastic injection mold temperature controller
Injection molding machine chiller used in the plastic industries, injection and blow molding, metalworking cutting oils, welding equipment, machine tooling, chemical processing, pharmaceutical formulation, food and beverage processing, paper and cement processing, vacuum systems, X-ray diffraction, power supplies and gas turbine power generation stations, analytical equipment, semiconductors, compressed air and gas cooling. They are also used to cool high-heat specialized items such as MRI machines and lasers in hospitals, hotels, and campuses.
Air Cooled Process Chiller Specification
|
Model Parameter |
AGS-170ADH | |
| nominal cooling capacity | kcal/h | 477988 |
| kw | 555.8 | |
| input power | kw | 181 |
| Max. Running current | A | 411.6 |
| power supply | 3PH~380V/50HZ | |
| refrigerant | type | R22/R407c/R134a |
| refrigerating circuit | 1 | |
| type of control | expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 2 | |
| Power | 76.8*2 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| condenser | type | air cooled type finned copper tube |
| cooling air flow (m3/h) | 175000 | |
| power(kw) | 27 | |
| evaporator | type | shell and tube |
| quantity | 1 | |
| chilled fluid flow (m3/h) | 95.6 | |
| inlet and outlet pipe diameter (inch) | 6 | |
| safety protection | compressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing | |
| net weight | kg | 4450 |
| Dimension | mm | 3400*4000*2053 |
Benefit of industrial chiller applications
How to select the model of the chiller ?
In the production process, the injection molding machine needs to cool the mold to achieve rapid condensation of plastic, improve product quality, and improve production efficiency.
Here, the chiller is indispensable. Chiller used in injection molding machine, through extrusion, blow bottle, thermoplastic, hydraulic system four steps to achieve rapid condensation of plastic.
This shows the importance of the chiller to the injection molding machine. In the selection of chiller should pay attention to:
In mold cooling, the choice of ice water energy depends on its specific heat capacity with the molding material, the temperature at the time of sol, the weight, and the temperature at the time of product release.
In terms of temperature difference, the smaller the temperature difference, the more ice water flow is required to carry away the same heat, and the smaller the ice water flow is required
Send your inquiry directly to us
