Plastic Air Cooled Industrial Water Chiller 200HP Injection Molding
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Solenoid Valve||Emerson||Drying Filter||Emerson|
|Oil Pressure Gauge||REFCO||Touch Screen||WEINTEK|
|PLC Controller||Siemens||Electrical Components||Schneider|
Plastic air cooled industrial water chiller,
air cooled industrial water chiller 200HP,
Injection Molding air cooled screw compressor chiller
Screw Type Chiller Central Chiller Air Cooled Water Chiller Industrial Plastic Chiller Cooling System Injection Molding
Air cooled central chiller means any chiller used for multiple process throughout a plant at the same time.It provides a continuous cold water to the process at a setting temperature.The system requires a water storage tank, internal circulations pump, process pumps to distribute the water to each process.
Why use an Air-cooled central chiller for plastic process?
1.Lower installed cost.The central screw chiller system contains refrigeration circuit, reservoir, pumps, and necessary components to work for multiple process throughout a plant, less pipes installation.
2.Convenience of installation and service.This air cooled central no need cooling tower installation, and water treatment, chiller condenser-tube cleaning, tower mechanical maintenance.
3.Simple operation. No need to operate multiple chiller units for different process one by one.
4.High Efficiency.The central chiller system continuously measures ambient and process conditions and will adjust to operate in the most efficient manner.
5.Save energy.Screw compressors can achieve comparable part-load efficiencies, to match the varying load requirements.
Central chiller specification
|nominal cooling capacity||kcal/h||562268|
|Max. Running current||A||487.7|
|type of control||expansion valve|
|condenser||type||air cooled type finned copper tube|
|cooling air flow (m3/h)||205000|
|evaporator||type||shell and tube|
|chilled fluid flow (m3/h)||112.5|
|inlet and outlet pipe diameter (inch)||6|
|safety protection||compressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing|
Benefit of using industrial central chiller applications in plastic industry
- Provide constant temperature and constant water flow chilled water to the mould of plastics production line, to increased production speed and ensure efficiency production.
- Accurate temperature control capability, the freezing temperature can be accurate to ±0.1, to ensure the highest quality final products.
- The cooling fluid is recirculated to reduce waste and cost.
- Water chiller systems prevent damage to heat-sensitive industrial components preventing undesirable repair downtime that might slow or even halt production altogether.
Central chiller featurers
- High efficiency Semi-hermetic screw compressor
- High efficiency condenser. Copper tube & hydrophilic aluminium fin coil type.
- Evaporator built with high efficiency shell & tube type heat exchanger.Good heat transfer effect, compact structure, stable quality, long service life.
- Refrigerant can be R407C,R22,R134A
- High pressure, low pressure, overload, water level, phase sequence and other protections to ensure the safe operation of the chiller
Industrial water chiller service from manufacturer
- 1.All the chillers are provided with 12 months free maintenance service.
- Provide technical explanation, chiller debugging support, technical training and chiller maintenance guidance.
- If necessary, after-sales engineers can be on-site service confirmed by both parties through communication .In some areas, local dealers can provide fast and convenient service.
- Provide the air chiller and water chiller required parts quickly to ensure the normal use of customers.If necessary, part of the wearing parts can be provided for backup after confirmation by both parties.
- Chiller maintenance service outside the warranty period, life-long tracking maintenance, cost price to provide equipment parts.
How to select the model of the chiller ?
- We need to know the heat load of your process or chiller cooling capacity.
- Required water temperature, water pressure and flow rate.
- Application and power supply in local.
- Max. Ambient temperature in summer day
- Customized special specifications are acceptable. Contact us for more chiller Specification by number +86 13923791048.