Place of Origin:
China
Brand Name:
ANGES
Model Number:
170HP
Contact Us
Air Cooled Chiller High Efficiency Central Chiller For Plastic Injection Chiller System Industrial Chiller Manufacturers
What's the Air-cooled water chiller?
In an air-cooled chiller, hot refrigerant entering the copper tube fin condenser and it is exposed to atmospheric air, there're fan on top of the condenser for heat dissipation.The Air-cooled water chiller doesn't need cooling tower for operation, easier for installation and lower maintenance cost, due to no need treatment requirements.They are often a preferred choice especially in locations that water is shortage or very expensive.
Air Cooled Central Chiller for Plastic Injection Process
This Air-cooled screw central chiller is perfect choice that use for plastic process,such as plastic injection ,plastic extruding , bottle blowing, film blowing and son on.The industrial chiller used to transfer heat away from the mold and maintain a stable cooling rate and ensure the highest quality final products.
A central chiller means any chiller used for multiple process throughout a plant at the same time.It provides a continuous cold water to the process at a setting temperature.The system requires a water storage tank, internal circulations pump, process pumps to distribute the water to each process.
Air Cooled Central Chiller Specification
|
Model Parameter |
AGS-170ADH | |
| nominal cooling capacity | kcal/h | 477988 |
| kw | 555.8 | |
| input power | kw | 181 |
| Max. Running current | A | 411.6 |
| power supply | 3PH~380V/50HZ | |
| refrigerant | type | R22 |
| refrigerating circuit | 1 | |
| type of control | expansion valve | |
| compressor | type | semi-hermetic screw |
| quantity | 1 | |
| Power | 76.8×2 | |
| start-up mode | Y-△ | |
| capacity control | 0-25-50-75-100 | |
| condenser | type | air cooled type finned copper tube |
| cooling air flow (m3/h) | 175000 | |
| power(kw) | 27 | |
| evaporator | type | shell and tube |
| quantity | 1 | |
| chilled fluid flow (m3/h) | 95.6 | |
| inlet and outlet pipe diameter (inch) | 6 | |
| safety protection | compressor over temperature, unit overload, high and low pressure, flow switch, phase sequence, phase-missing, anti-freezing | |
| net weight | kg | 4450 |
| Dimension | mm | 3150*4200*2200 |
Note: 1. Nominal cooling capacity is according to:
Inlet chilled fluid temperature:17℃
Outlet chilled fluid temperature: 12℃
Inlet cooling air temperature: 30℃
Outlet cooling air temperature:35℃
2. Working Range:
The temperature range of chilled fluid is from 5℃ to 30℃;
Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
The machine can be used while the ambient temperature is below 40℃.
Some distinctive features of Air-cooled central screw type chillers:
Send your inquiry directly to us
