Product Description:

There will be thermal deformation when the machine is in the procession so that the machine will less precision.In order to avoid the problem,ANGES specially designs and develops the AJO series chillers for cooling the oil. At present, the chiller is widely used in CNC manufacturing plants ( CNC planar grinder, CNC rapid lathe, CNC oil-hydraulic machine, CNC water engraving machine ) ,electro discharge machining plant.

 

Model Item		AJO-3	AJO-4	AJO-5	AJO-6	AJO-8(D)	AJO-10(D)
nominal cooling capacity	kcal/h	6450	8600	10750	12470	17200	21500
	kw	7.5	10.0	12.5	14.5	20.0	25.0
input power	kw	4	5.5	6.4	7.6	9.9	13.1
power supply		3PH / 380V / 50HZ
refrigerant	type	R22 ( R134a / R407c )
	type of control	capillary / expansion valve
compressor	type	hermetic rotary ( piston )
	power(KW)	2.7	3.6	4.5	5	3.6*2	4.5*2
condensor	type	high efficient finned copper tube + low noise outer rotor fan
	air volume(m3)	3000	4000	5000	6000	8000	10000
evaporator	type	stainless steel plate exchanger / copper coil type / shell and tube type
	inlet and outlet pipe diameter	3/4"	3/4"	1"	1"	1"	1"
oil pump	power(kw)	1.1	1.5	1.5	2.2	2.2	3
	flow（L/min）	25	30	30	55	65	70
safety protecion		compressor over temperature, over current, high and low pressure, over temperature,phase sequence
dimension	length（mm）	930	1140	1140	1140	1310	1680
	width（mm）	520	560	560	560	720	810
	height（mm）	975	1040	1040	1040	1270	1280
weight	Kg	125	145	165	195	285	385

 Note: 1. nominal cooling capacity is according to:
               Inlet chilled oil temperature: 25℃
               Outlet chilled oil temperature: 20℃
               Inlet cooling air temperature: 30℃
               Outlet cooling air temperature: 38℃
          2. working Range:
              The temperature range of chilled fluid is from 20℃ to 50℃;
              Temperature difference between inlet and outlet chilled fluid is from 3℃ to 8℃.
              The machine can be used while the ambient temperature is below 35℃.
             We can offer customized chillers if the oil temperature required is below 20℃.      
             We reserve the right to modify the above dimensions or parameters without further notice.